![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-100/tigerswitch-100_management-manual_1300417100.webp)
C
ONFIGURING
THE
S
WITCH
2-70
Adding Interfaces Based on Membership Type
Use the VLAN Static Table to modify the settings for an existing VLAN.
You can add or delete port members for a VLAN, disable or enable VLAN
tagging for any port, or prevent a port from being automatically added to a
VLAN via the GVRP protocol. (Note that VLAN 1 is the default
untagged VLAN containing all ports on the switch, and cannot be
modified via this page.)
You can use the VLAN Static Table to assign ports to the specified VLAN
group as an IEEE 802.1Q tagged port. Assign ports as tagged if they are
connected to 802.1Q VLAN-compliant devices. If the port is connected to
VLAN-unaware devices, frames will be passed to the untagged VLAN
group this port has been assigned to under the VLAN Port Configuration
page.
Command Attributes
•
Port
– Port identifier.
•
Trunk
– Trunk identifier.
•
VLAN
– ID of configured VLAN (1-4094, no leading zeroes).
•
Name
– Name of the VLAN (1 to 32 characters).
•
Status
– Shows if this VLAN is enabled or disabled.
-
Enable
: VLAN is operational.
-
Disable
: VLAN is suspended; i.e., does not pass packets.
•
Membership Type
– Select VLAN membership for each interface by
marking the appropriate radio button for a port or trunk:
-
Tagged
: Interface is a member of the VLAN. All packets
transmitted by the port will be tagged, that is, carry a tag and
therefore carry VLAN or CoS information.
-
Untagged
: Interface is a member of the VLAN. All packets
transmitted by the port will be untagged, that is, not carry a tag and
Summary of Contents for TigerSwitch 100
