![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-100/tigerswitch-100_management-manual_1300417218.webp)
C
OMMAND
L
INE
I
NTERFACE
3-74
line
Use this command to identify a specific line for configuration, and to
process subsequent line configuration commands.
Syntax
line
{
console
|
vty
}
•
console
- Console terminal line.
•
vty
- Virtual terminal for remote console access.
Default Setting
There is no default line.
Command Mode
Global Configuration
Command Usage
Telnet is considered a virtual terminal connection and will be shown as
“Vty” in screen displays such as
show users
. However, the serial
communication parameters (e.g., databits) do not affect Telnet
connections.
silent-time
Sets the amount of time the management
console is inaccessible after the number of
unsuccessful logon attempts exceeds the
threshold set by the
password-thresh
command
LC
3-79
databits
Sets the number of data bits per character that
are interpreted and generated by hardware
LC
3-80
parity
Defines the generation of a parity bit
LC
3-81
speed
Sets the terminal baud rate
LC
3-82
stopbits
Sets the number of the stop bits transmitted
per byte
LC
3-83
show line
Displays a terminal line's parameters
NE,
PE
3-83
Command
Function
Mode Page
Summary of Contents for TigerSwitch 100
