![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-100/tigerswitch-100_management-manual_1300417032.webp)
C
ONFIGURING
THE
S
WITCH
2-2
Notes: 1.
You are allowed three attempts to enter the correct password;
on the third failed attempt the current connection is
terminated.
2.
If you log into the Web interface as guest (Normal Exec level),
you can view page information but only change the guest
password. If you log in as “admin” (Privileged Exec level), you
can apply changes on all pages.
3.
If the path between your management station and this switch
does not pass through any device that uses the Spanning Tree
Protocol, then you can set the switch port attached to your
management station to fast forwarding to improve the switch’s
response time to management commands issued through the
Web interface. (See “STP Port and Trunk Configuration” on
page 2-58.)
Navigating the Web Browser Interface
To access the Web-browser interface you must first enter a user name and
password. The administrator has Read/Write access to all configuration
parameters and statistics. The default user name and password for the
administrator is “admin.”
Home Page
When your Web browser connects with the switch’s Web agent, the home
page is displayed as shown below. The home page displays the Main Menu
on the left side of the screen and System Information on the right side.
Summary of Contents for TigerSwitch 100
