![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-100/tigerswitch-100_management-manual_1300417302.webp)
C
OMMAND
L
INE
I
NTERFACE
3-158
Command Usage
• The precedence for priority mapping is IP Precedence or IP DSCP, and
default switchport priority.
• IP Precedence values are mapped to default Class of Service values on
a one-to-one basis according to recommendations in the IEEE 802.1p
standard, and then mapped to the queue defaults.
• This command sets the IP Precedence for all interfaces.
Example
The following example shows how to map IP precedence value 1 to CoS
value 0:
map ip dscp (Global Configuration)
Use this command to enable IP DSCP mapping (i.e., Differentiated
Services Code Point mapping). Use the
no
form to disable IP DSCP
mapping.
Syntax
map ip dscp
no map ip dscp
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• The precedence for priority mapping is IP Precedence or IP DSCP, and
default switchport priority.
Console(config)#interface ethernet 1/5
Console(config-if)#map ip precedence 1 cos 0
Console(config-if)#
Summary of Contents for TigerSwitch 100
