![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-100/tigerswitch-100_management-manual_1300417049.webp)
S
ECURITY
2-19
CLI Commands
CLI – Specify all the required parameters to enable logon authentication.
HTTPS
You can configure the switch to enable the Secure Hypertext Transfer
Protocol (HTTPS) over the Secure Socket Layer (SSL), providing secure
access (i.e., an encrypted connection) to the switch’s Web interface.
Both the HTTP and HTTPS service can be enabled independently on the
switch. However, you cannot configure the HTTP and HTTPS servers to
use the same UDP port. If you change the HTTPS port number, clients
attempting to connect to the HTTPS server must specify the port number
in the URL, in this format: https://device:port_number.
Note:
If you enable HTTPS, you must indicate this in the URL.
For example: https://device [:port_number]
Console(config)#authentication login radius
3-51
Console(config)#radius-server host 192.168.1.25
3-52
Console(config)#radius-server port 181
3-53
Console(config)#radius-server key green
3-53
Console(config)#radius-server retransmit 5
3-54
Console(config)#radius-server timeout 10
3-55
Console#show radius-server
3-55
Server IP address: 192.168.1.25
Communication key with radius server: green
Server port number: 181
Retransmit times: 5
Request timeout: 10
Console(config)#authentication login tacacs
3-51
Console(config)#tacacs-server host 10.20.30.40
3-56
Console(config)#tacacs-server port 200
3-56
Console(config)#tacacs-server key green
3-57
Console#show tacacs-server
3-57
Server IP address: 10.20.30.40
Communication key with tacacs server: green
Server port number: 200
Console(config)#
Summary of Contents for TigerSwitch 100
