![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-100/tigerswitch-100_management-manual_1300417137.webp)
M
ULTICAST
C
ONFIGURATION
2-107
Adding Multicast Addresses to VLANs
Multicast filtering can be dynamically configured using IGMP Snooping
and IGMP Query messages as described in “Configuring IGMP
Parameters” on page 2-100. For certain application that require tighter
control, you may need to statically configure a multicast service on the
switch. First add all the ports attached to participating hosts to a common
VLAN, and then assign the multicast service to that VLAN group.
Command Usage
•
Static multicast addresses are never aged out.
•
When a multicast address is assigned to specific VLAN, the
corresponding traffic can only be forwarded to ports within that
VLAN.
Command Attribute
•
Interface
– Activates the Port or Trunk scroll down list.
•
VLAN ID
– Selects the VLAN to propagate all multicast traffic
coming from the attached multicast router/switch.
•
Multicast IP
– The IP address for a specific multicast service
•
Port
or
Trunk
– Specifies the interface attached to a multicast router.
Summary of Contents for TigerSwitch 100
