![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-100/tigerswitch-100_management-manual_1300417230.webp)
C
OMMAND
L
INE
I
NTERFACE
3-86
description
Use this command to add a description to an interface. Use the
no
form to
remove the description.
Syntax
description
string
no description
string
- Comment or a description to help you remember what is
attached to this interface. (Range: 1-64 characters)
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
The following example adds a description to Ethernet port 15.
speed-duplex
Use this command to configure the speed and duplex mode of a given
interface when autonegotiation is disabled. Use the
no
form to restore the
default.
Syntax
speed-duplex
{
1000full
|
100full
|
100half
|
10full
|
10half
}
no speed-duplex
Console(config)#interface ethernet 1/25
Console(config-if)#
Console(config)#interface ethernet 1/15
Console(config-if)#description RD-SW#3
Console(config-if)#
Summary of Contents for TigerSwitch 100
