SMC Networks TigerSwitch 100, Management Manual

Page: 51 / 334

S
ECURITY
2-21
CLI Commands
CLI – Enter the following commands to specify the secure port number
and to enable HTTPS.
SSH
The Secure Shell (SSH) server feature provides remote management access
via encrypted paths between the switch and SSH-enabled management
station clients.
Note: There are two versions of the SSH protocol currently available,
SSH v1.x and SSH v2.x. The switch supports only SSH v1.5.
Command Attributes
• SSH Server Status — Allows you to enable/disable the SSH server
feature on the switch. (Default: enabled)
• SSH authentication timeout — Specifies the time interval in seconds
that the SSH server waits for a response from a client during an
authentication attempt. (Range: 1 to 120 seconds; Default:
120 seconds)
• SSH authentication retries — Specifies the number of
authentication attempts that a client is allowed before authentication
fails and the client has to restart the authentication process.
(Range: 1 to 5 times; Default: 3)
Web – Click System, SSH Settings. Select “Enabled” for the SSH Server
Status, specify the authentication timeout and number of retries, then click
Apply.
Console(config)#ip http secure-server 3-32
Console(config)#ip http secure-port 441 3-33
Console(config)#