SMC Networks TigerSwitch 100, Management Manual

Page: 168 / 334

C
OMMAND
L
INE
I
NTERFACE
3-24
boot system
Use this command to specify the file or image used to start up the system.
Syntax
boot system { boot-rom | config | opcode }: filename
The type of file or image to set as a default includes:
• boot-rom - Boot ROM
• config - Configuration file
• opcode - Run-time operation code
The colon (:) is required.
filename - Name of the configuration file or image name.
Default Setting
None
Command Mode
Global Configuration
Command Usage
• A colon (:) is required after the specified file type.
• If the file contains an error, it cannot be set as the default file.
Example
Related Commands
dir (3-22)
whichboot (3-23)
Console(config)#boot system config: startup
Console(config)#