![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-100/tigerswitch-100_management-manual_1300417304.webp)
C
OMMAND
L
INE
I
NTERFACE
3-160
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
• The precedence for priority mapping is IP Port, IP Precedence or IP
DSCP, and default switchport priority.
• DSCP priority values are mapped to default Class of Service values
according to recommendations in the IEEE 802.1p standard, and then
mapped to the queue defaults.
• This command sets the DSCP Priority for all interfaces.
Example
The following example shows how to map IP DSCP value 1 to CoS value
0:
show map ip precedence
Use this command to show the IP precedence priority map.
Syntax
show map ip precedence
[
interface
]
interface
•
ethernet
unit
/
port
-
unit
- This is device 1.
-
port
- Port number.
•
port-channel
channel-id
(Range: 1-6)
Default Setting
None
Console(config)#interface ethernet 1/5
Console(config-if)#map ip dscp 1 cos 0
Console(config-if)#
Summary of Contents for TigerSwitch 100
