Allied Telesis
www.alliedtelesis.com
Datasheet |
integrated Multiservice Access Platform
FX10BX
AT-TN109-A 10 Port 100Mbps BX FTTx Service Module
Fiber to the Home/Business over
Single Fiber
The FX10BX is one of three Allied Telesis
802.3ah Active FTTH/B service modules for the
iMAP product family.This card provides 10 ports
at 100Mbps (full-duplex) over a single fiber
(Single-mode). Also available are dual fiber
options in either Single-mode or Multi-mode vari-
ations.The Gigabit feed into the iMAP backplane
allows the FX10 modules to operate completely
at wirespeed.
The additional Layer 2+ switching allows Service
Providers to meet the demands of multi-cast IP
video,Video on Demand, voice and data services.
With the FX10 modules, you can be assured
future bandwidth needs of HDTV will be
addressed as consumer demand increases.
Allied Telesis’ OAM solution allows for individual
full configuration and monitoring of each port.The
FX10 modules provide configuration tools to:
•
Control or limit subscriber access
•
Enforce port security rules
•
Limit services to a port
•
Manage QoS across the card
•
Support network double-tagging
•
Control ingress or egress service rates
A multitude of applications can be supported
with the fiber-based 100Mbps access interfaces
including:
•
FTTH for Voice,Video and Data Services
•
FTTB for IP PBX, Ethernet and VPN services
•
Campus LAN network uplinks
Whether it is derived voice or HDTV IP Video,
the FX10 will satisfy all bandwidth and mission
critical services with ease.
Part of Allied Telesis’ IP Broadband
Access Family
Whether it is broadband ADSL2+, FTTH, POTS
or T1/E1 circuits, the iMAP family is the ideal
platform for last mile service delivery.The
FX10BX line card can be used with any of the
iMAP family of carrier grade, IP Multiservice
Access platforms:
•
iMAP 9700 (9RU, 17 service slots)
•
iMAP 9400 (3RU, 7 service slots)
•
MiniMAP 9100 (1RU, 3 service slots)
Provisioning, management, and diagnostics of
subscriber ports can be accomplished from
either the iMAP command line interface or the
NMS.
The FX10BX has been designed to survive the
most rugged environmental conditions. It can be
confidently deployed in either a central office or
in outdoor enclosures withstanding extremes of
heat, cold, and lightning exposure.
Allied Telesis provides a large portfolio of
FTTx, Ethernet and xDSL transport and access
equipment. In addition, Allied Telesis provides a
complete set of xDSL and FTTx CPE solutions
in the form of Gateways, Layer 2/ Layer 3
switches, routers or media converters to
terminate the broadband link.
Key Features
Port-based
•
VLANs
•
VLAN translation
•
Double-tagging (HVLAN)
•
Filtering
•
Ingress metering
•
Egress port rate limiting
•
Counters
•
Classification and remarking
•
RMON
QoS
•
Four queues
•
Priority scheduling
Security
•
MAC limiting (up to 64)
•
MAC Flooding – VLAN-based
Services
•
STP and RSTP
•
Video-optimized – IGMP Snooping
•
Upstream forwarding only
Support for
•
Business services
•
Residential service
•
Single fiber, Single-mode
