-13-
No. JXC
※
-OMT0002-C
After the initial title window is displayed, the following main window will be displayed.
The communication status between the controller and PC is indicated at the bottom of the main
window.
Display
Details
Off-line state
On-line state
When the PC is able to communicate with the controller, "On-line" status is established
automatically.
If the communication is in the off-line state, the PC is not able to communicate with the controller.
Please check the following.
-
Check that power is supplied to the controller at the correct voltage.
-
Check that the controller and the PC are connected to each other via the
communication cable.
-
Check that the USB driver is installed correctly.
(3) Alarm check
If the Alarm button at the top of the main window of the setting software flashes red an alarm has
been generated.
It is possible to check the details of the generated alarm by clicking the Alarm button. Refer to
13.2
Alarms and countermeasures
for details of the countermeasures against the alarm, and reset
the alarm.
