-98-
No. JXC
※
-OMT0002-C
15.4 Operating environment
Warning
1. Avoid use in the following environments.
a) Locations where a large amount of dust and cutting chips are airborne.
b) Locations where the ambient temperature is outside the range of the temperature specification
(refer to specifications).
c) Locations where the ambient humidity is outside the range of the humidity specification (refer to
specifications).
d) Locations where corrosive gas, flammable gas, seawater, water and steam are present.
e) Locations where strong magnetic or electric fields are generated.
f) Locations where direct vibration or impact is applied to the product.
g) Areas that are dusty, or are exposed to splashes of water and oil drops.
h) Areas exposed to direct sunlight (ultraviolet ray).
i) Environment at an altitude of 1000 meters or higher.
Heat dissipation and withstand voltage will decrease. Contact SMC for details.
2. Do not use in an environment where the product is directly exposed to liquid, such as cutting
oils.
If cutting oils, coolant or oil mist contaminates the product, failure or increased sliding resistance can
result.
3. Install a protective cover when the product is used in an environment directly exposed to
foreign matter such as dust, cutting chips and spatter.
Play or increased sliding resistance can result.
4. Provide a protective cover if the product is used in direct sunlight.
5.
Shield the product if there is a heat source nearby.
When there is a heat source surrounding the product, the radiated heat from the heat source can
increase the temperature of the product beyond the operating temperature range.
6. Grease oil can be reduced due to the external environment and operating conditions. The
lubrication performance may deteriorate and shorten the life of the product.
[Storage]
Warning
1. Do not store the product with direct contact to rain or water drops. Do not store the product where
it is exposed to harmful gases or liquid.
2. Store in an area that is shaded from direct sunlight and has a temperature and humidity within the
specified range (-10
o
C to 60
o
C and 35 to 85%. No condensation or freezing.)
3. Do not apply vibration or impact to the product during storage.
15.5 Maintenance and Precautions
Warning
1. Do not disassemble or repair the product.
Fire or electric shock can result.
2. Before modifying or checking the wiring, the voltage should be checked with a tester 5
minutes after the power supply is turned off.
Electric shock can result.