![background image](http://html1.mh-extra.com/html/smc-networks/jxc93-series/jxc93-series_operation-manual_1299618010.webp)
-9-
No. JXC
※
-OMT0002-C
●
Motor drive power connector
(Accessory)
<Applicable wire size>
AWG16 (1.25mm
2
)
PC
●
USB cable
Product No.: JXC-W1-2
位 置
速度
100
500
200
1000
50
200
1
2
3
テスト
テスト
テスト
現 在位 置
120.3
現 在速 度
200
mm
mm/s
動作 中
ア ラーム
モニ タ
設定
位 置
速度
100
500
200
1000
50
200
1
2
3
テスト
テスト
テスト
現 在位 置
120.3
現 在速 度
200
mm
mm/s
動作 中
ア ラーム
モニ タ
設定
●
Controller set up kit
Contents
-Controller Setting Kit
-USB cable
Product No.: JXC-W1
PLC
Main control power
supply 24VDC
Motor control and
motor drive power
supply 24 VDC
●
Power cable for main control
Cable length: 1.5m (Accessory)
Product No.: JXC-C1
Note2)
Note2)
Note2)
Note2)
●Controller setting software
Product No.: JXC-W1-1
Ethernet cable
(Category 5
cable or higher)
Note2)
Note3)
●Motor control power
supply connector
(Accessory)
<Applicable wire size>
AWG20 (0.5mm
2
)
2.3 Product configuration
Structure of the controller.
Note 1) Connected actuators should be ordered separately.
Note 2) PLC, Ethernet cable with category 5 or higher, PC and 24VDC power supply should be
supplied by the user.
Note 3) Cable is possible to connect to either P1 or P2. Follow the topology of EtherNet/IP
communication for further direction.
Warning
Refer to
14. Common Precautions for wiring and cable
.
Use
“USB cable (JXC-W1-2)” when communicating with a PC.
Caution
Connector “CI3 4” must be connected even when axis 3 and 4 are not used. If not, a "Modbus
Error" alarm will be generated.
To M PWR
●Controller
●
Electric actuator
Note
1)
Options
To CI
To ENC
To MOT
To USB
Note
1)
●Actuator cable
Part No:
LE-CP-
-
(Robotic type cable)
LE-CP-
-
-S
(Standard cable)
To C PWR
EtherNet/IP
To P1
、
P2