![background image](http://html1.mh-extra.com/html/smc-networks/8708l2/8708l2_management-manual_1300245314.webp)
C
OMMAND
L
INE
I
NTERFACE
4-24
Default Setting
auto
Command Mode
Line Configuration
Command Usage
Set the speed to match the baud rate of the device connected to the
serial port. Some baud rates available on devices connected to the port
might not be supported. The system indicates if the speed you selected
is not supported. If you select the “auto” option, the switch will
automatically detect the baud rate configured on the attached terminal,
and adjust the speed accordingly.
Example
To specify 57600 bps, enter this command:
stopbits
This command sets the number of the stop bits transmitted per byte. Use
the
no
form to restore the default setting.
Syntax
stopbits
{
1
|
2
}
• 1 - One stop bit
• 2 - Two stop bits
Default Setting
1 stop bit
Command Mode
Line Configuration
Console(config-line)#speed 57600
Console(config-line)#
Summary of Contents for 8708L2
