manualshive.com logo in svg

SMC Networks 8708L2, Management Manual

Share
Download
SMC Networks 8708L2 Management Manual Download Page 82

C

ONFIGURING

 

THE

 S

WITCH

3-30

Saving or Restoring Configuration Settings

You can upload/download configuration settings to/from a TFTP server, 
or copy files to and from switch units in a stack. The configuration file can 
be later downloaded to restore the switch’s settings. 

Command Attributes

•

File Transfer Method – The configuration copy operation includes 
these options:
- file to file

 

– Copies a file within the switch directory, assigning it a 

new name.

- file to running-config

 

– Copies a file in the switch to the running 

configuration.

- file to startup-config

 

– Copies a file in the switch to the startup 

configuration.

- file to tftp

 

– Copies a file from the switch to a TFTP server.

- running-config to file

 

– Copies the running configuration to a file.

- running-config to startup-config

 

– Copies the running config to the 

startup config.

- running-config to tftp

 

– Copies the running configuration to a TFTP 

server.

- startup-config to file

 

– Copies the startup configuration to a file on 

the switch.

- startup-config to running-config

 

– Copies the startup config to the 

running config.

- startup-config to tftp

 

– Copies the startup configuration to a TFTP 

server.

- tftp to file

 

– Copies a file from a TFTP server to the switch.

- tftp to running-config

 

– Copies a file from a TFTP server to the 

running config.

- tftp to startup-config

 

– Copies a file from a TFTP server to the 

startup config.

Summary of Contents for 8708L2































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands