![background image](http://html1.mh-extra.com/html/smc-networks/8708l2/8708l2_management-manual_1300245507.webp)
S
PANNING
T
REE
C
OMMANDS
4-217
Default Setting
20
Command Mode
MST Configuration
Command Usage
An MSTI region is treated as a single node by the STP and RSTP
protocols. Therefore, the message age for BPDUs inside an MSTI
region is never changed. However, each spanning tree instance within a
region, and the internal spanning tree (IST) that connects these
instances use a hop count to specify the maximum number of bridges
that will propagate a BPDU. Each bridge decrements the hop count by
one before passing on the BPDU. When the hop count reaches zero,
the message is dropped.
Example
spanning-tree spanning-disabled
This command disables the spanning tree algorithm for the specified
interface. Use the
no
form to reenable the spanning tree algorithm for the
specified interface.
Syntax
[
no
]
spanning-tree spanning-disabled
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet Ports 1-8, Port Channel)
Example
This example disables the spanning tree algorithm for port 5.
Console(config-mstp)#max-hops 30
Console(config-mstp)#
Console(config)#interface ethernet 1/5
Console(config-if)#spanning-tree spanning-disabled
Console(config-if)#
Summary of Contents for 8708L2
