![background image](http://html1.mh-extra.com/html/smc-networks/8708l2/8708l2_management-manual_1300245533.webp)
VLAN C
OMMANDS
4-243
3. Then map the protocol for each interface to the appropriate VLAN
using the
protocol-vlan protocol-group
command (Interface
Configuration mode).
protocol-vlan protocol-group
(Configuring Groups)
This command creates a protocol group, or to add specific protocols to a
group. Use the
no
form to remove a protocol group.
Syntax
protocol-vlan protocol-group
group-id
[{
add
|
remove
}
frame-type
frame
protocol-type
protocol
]
no protocol-vlan protocol-group
group-id
•
group-id
- Group identifier of this protocol group.
(Range: 1-2147483647)
•
frame
32
- Frame type used by this protocol.
(Options: ethernet, rfc_1042, llc_other)
•
protocol
- Protocol type. The only option for the llc_other frame type
is ipx_raw. The options for all other frames types include: ip, arp,
rarp.
Default Setting
No protocol groups are configured.
Command Mode
Global Configuration
Example
The following creates protocol group 1, and specifies Ethernet frames
with IP and ARP protocol types:
32. SNAP frame types are not supported by this switch due to hardware limitations.
Console(config)#protocol-vlan protocol-group 1 add frame-type
ethernet protocol-type ip
Console(config)#protocol-vlan protocol-group 1 add frame-type
ethernet protocol-type arp
Console(config)#
Summary of Contents for 8708L2
