![background image](http://html1.mh-extra.com/html/smc-networks/8708l2/8708l2_management-manual_1300245376.webp)
C
OMMAND
L
INE
I
NTERFACE
4-86
Command Usage
• This switch provides more efficient throughput for large sequential
data transfers by supporting jumbo frames up to 9216 bytes. Compared
to standard Ethernet frames that run only up to 1.5 KB, using jumbo
frames significantly reduces the per-packet overhead required to
process protocol encapsulation fields.
• To use jumbo frames, both the source and destination end nodes (such
as a computer or server) must support this feature. Also, when the
connection is operating at full duplex, all switches in the network
between the two end nodes must be able to accept the extended frame
size. And for half-duplex connections, all devices in the collision
domain would need to support jumbo frames.
• The current setting for jumbo frames can be displayed with the
show
system
command (page 4-83).
Example
Flash/File Commands
These commands are used to manage the system code or configuration
files.
Console(config)#jumbo frame
Console(config)#
Table 4-25 Flash/File Commands
Command
Function
Mode
Page
copy
Copies a code image or a switch configuration to
or from flash memory or a TFTP server
PE
4-87
delete
Deletes a file or code image
PE
4-90
dir
Displays a list of files in flash memory
PE
4-91
whichboot
Displays the files booted
PE
4-92
boot system
Specifies the file or image used to start up the
system
GC
4-93
Summary of Contents for 8708L2
