SMC Networks 8708L2, Management Manual

Page: 305 / 606

L
INE
C
OMMANDS
4-15
line
This command identifies a specific line for configuration, and to process
subsequent line configuration commands.
Syntax
line { console | vty }
• console - Console terminal line.
• vty - Virtual terminal for remote console access (i.e., Telnet).
Default Setting
There is no default line.
Command Mode
Global Configuration
Command Usage
Telnet is considered a virtual terminal connection and will be shown as
“VTY” in screen displays such as
show users . However, the serial
communication parameters (e.g., databits) do not affect Telnet
connections.
parity
*
Defines the generation of a parity bit LC 4-23
speed
*
Sets the terminal baud rate LC 4-23
stopbits
*
Sets the number of the stop bits transmitted
per byte LC 4-24
disconnect Terminates a line connection PE 4-25
show line Displays a terminal line's parameters NE,
PE 4-25
*. These commands only apply to the serial port.
Table 4-5 Line Commands (Continued)
Command Function Mode Page