![background image](http://html1.mh-extra.com/html/smc-networks/8708l2/8708l2_management-manual_1300245440.webp)
C
OMMAND
L
INE
I
NTERFACE
4-150
Example
SNMP Commands
Controls access to this switch from management stations using the Simple
Network Management Protocol (SNMP), as well as the error types sent to
trap managers.
SNMP Version 3 also provides security features that cover message
integrity, authentication, and encryption; as well as controlling user access
to specific areas of the MIB tree. To use SNMPv3, first set an SNMP
engine ID (or accept the default), specify read and write access views for
the MIB tree, configure SNMP user groups with the required security
model (i.e., SNMP v1, v2c or v3) and security level (i.e., authentication and
privacy), and then assign SNMP users to these groups, along with their
specific authentication and privacy passwords.
Console#show access-group
Interface ethernet 1/2
IP standard access-list david
MAC access-list jerry
Console#
Table 4-39 SNMP Commands
Command
Function
Mode
Page
snmp-server
Enables the SNMP agent
GC
4-151
show snmp
Displays the status of SNMP
communications
NE, PE
4-152
snmp-server
community
Sets up the community access string to
permit access to SNMP commands
GC
4-153
snmp-server
contact
Sets the system contact string
GC
4-153
snmp-server
location
Sets the system location string
GC
4-154
snmp-server host Specifies the recipient of an SNMP
notification operation
GC
4-155
Summary of Contents for 8708L2
