![background image](http://html1.mh-extra.com/html/smc-networks/8708l2/8708l2_management-manual_1300245514.webp)
C
OMMAND
L
INE
I
NTERFACE
4-224
Command Usage
• Each spanning-tree instance is associated with a unique set of VLAN
IDs.
• This command is used by the multiple spanning-tree algorithm to
determine the best path between devices. Therefore, lower values
should be assigned to interfaces attached to faster media, and higher
values assigned to interfaces with slower media.
• Path cost takes precedence over interface priority.
Example
Related Commands
spanning-tree mst port-priority (4-224)
spanning-tree mst port-priority
This command configures the interface priority on a spanning instance in
the Multiple Spanning Tree. Use the
no
form to restore the default.
Syntax
spanning-tree mst
instance_id
port-priority
priority
no spanning-tree mst
instance_id
port-priority
•
instance_id
- Instance identifier of the spanning tree.
(Range: 0-4094, no leading zeroes)
•
priority
- Priority for an interface. (Range: 0-240 in steps of 16)
Default Setting
128
Command Mode
Interface Configuration (Ethernet Ports 1-8, Port Channel)
Console(config)#interface ethernet ethernet 1/5
Console(config-if)#spanning-tree mst 1 cost 50
Console(config-if)#
Summary of Contents for 8708L2
