![background image](http://html1.mh-extra.com/html/smc-networks/8708l2/8708l2_management-manual_1300245425.webp)
A
CCESS
C
ONTROL
L
IST
C
OMMANDS
4-135
Example
Related Commands
map access-list ip (4-133)
match access-list ip
This command changes the IEEE 802.1p priority, IP Precedence, or
DSCP Priority of a frame matching the defined ACL rule. (This feature is
commonly referred to as ACL packet marking.) Use the
no
form to
remove the ACL marker.
Syntax
match
access-list ip
acl_name
[
set priority
priority
] {
set tos
tos_value
|
set
dscp
dscp_value
}
no
match
access-list ip
acl_name
•
acl_name
– Name of the ACL. (Maximum length: 16 characters)
•
priority
– Class of Service value in the IEEE 802.1p priority tag.
(Range: 0-7; 7 is the highest priority)
• tos_value
– IP Precedence value. (Range: 0-7)
•
dscp_value
– Differentiated Services Code Point value. (Range: 0-63)
Default Setting
None
Command Mode
Interface Configuration (Ethernet Ports 1-8)
Command Usage
• You must configure an ACL mask before you can change frame
priorities based on an ACL rule.
• Traffic priorities may be included in the IEEE 802.1p priority tag. This
tag is also incorporated as part of the overall IEEE 802.1Q VLAN tag.
To specify this priority, use the
set priority
keywords.
Console#show map access-list ip
Access-list to COS of Eth 1/4
Access-list ALS1 cos 0
Console#
Summary of Contents for 8708L2
