![background image](http://html1.mh-extra.com/html/smc-networks/8708l2/8708l2_management-manual_1300245524.webp)
C
OMMAND
L
INE
I
NTERFACE
4-234
Example
The following shows how to set the configuration mode to port 1, and
then set the switchport mode to hybrid:
Related Commands
switchport acceptable-frame-types (4-234)
switchport acceptable-frame-types
This command configures the acceptable frame types for a port. Use the
no
form to restore the default.
Syntax
switchport acceptable-frame-types
{
all
|
tagged
}
no switchport acceptable-frame-types
•
all
- The port accepts all frames, tagged or untagged.
•
tagged
- The port only receives tagged frames.
Default Setting
All frame types
Command Mode
Interface Configuration (Ethernet Ports 1-8, Port Channel)
Command Usage
When set to receive all frame types, any received frames that are
untagged are assigned to the default VLAN.
Example
The following example shows how to restrict the traffic received on port 1
to tagged frames:
Console(config)#interface ethernet 1/1
Console(config-if)#switchport mode hybrid
Console(config-if)#
Console(config)#interface ethernet 1/1
Console(config-if)#switchport acceptable-frame-types tagged
Console(config-if)#
Summary of Contents for 8708L2
