SMC Networks 8708L2, Management Manual

Page: 270 / 606

C
ONFIGURING THE
S
WITCH
3-218
Web – Click Priority, IP Port Status. Set IP Port Priority Status to Enabled.
Figure 3-91 IP Port Priority Status
Click Priority, IP Port Priority. Enter the port number for a network
application in the IP Port Number box and the new CoS value in the Class
of Service box, and then click Apply.
Figure 3-92 IP Port Priority
CLI – The following example globally enables IP Port Priority service on
the switch, maps HTTP traffic (on port 1) to CoS value 0, and then
displays the IP Port Priority settings.
Console(config)#map ip port 4-259
Console(config)#interface ethernet 1/1 4-170
Console(config-if)#map ip port 80 cos 0 4-260
Console(config-if)#end
Console#show map ip port ethernet 1/5
4-264
TCP port mapping status: disabled
Port Port no. COS
--------- -------- ---
Eth 1/ 1 80 0
Console#