![background image](http://html1.mh-extra.com/html/smc-networks/8708l2/8708l2_management-manual_1300245410.webp)
C
OMMAND
L
INE
I
NTERFACE
4-120
access-list ip
This command adds an IP access list and enters configuration mode for
standard or extended IP ACLs. Use the
no
form to remove the specified
ACL.
Syntax
[
no
]
access-list ip
{
standard
|
extended
}
acl_name
•
standard
– Specifies an ACL that filters packets based on the source
IP address.
•
extended
– Specifies an ACL that filters packets based on the
source or destination IP address, and other more specific criteria.
•
acl_name
– Name of the ACL. (Maximum length: 16 characters)
Default Setting
None
show access-list
ip
mask-precedence
Shows the ingress or egress rule masks for
IP ACLs
PE
4-131
ip access-group Adds a port to an IP ACL
IC
4-132
show ip
access-group
Shows port assignments for IP ACLs
PE
4-132
map access-list ip Sets the CoS value and corresponding
output queue for packets matching an
ACL rule
IC
4-133
show map
access-list ip
Shows CoS value mapped to an access list
for an interface
PE
4-134
match access-list
ip
Changes the 802.1p priority, IP
Precedence, or DSCP Priority of a frame
matching the defined rule (i.e., also called
packet marking)
IC
4-135
show marking
Displays the current configuration for
packet marking
PE
4-136
Table 4-34 IP ACL Commands
(Continued)
Command
Function
Mode
Page
Summary of Contents for 8708L2
