background image

Command Manual – VLAN-VPN 
H3C S3100-52P Ethernet Switch 

Table of Contents 

 

Table of Contents 

Chapter 1 VLAN-VPN Configuration Commands ....................................................................... 1-1

 

1.1 VLAN-VPN Configuration Commands ............................................................................... 1-1

 

1.1.1 display port vlan-vpn ............................................................................................... 1-1

 

1.1.2 vlan-vpn enable ....................................................................................................... 1-2

 

1.1.3 vlan-vpn inner-cos-trust........................................................................................... 1-3

 

1.1.4 vlan-vpn priority ....................................................................................................... 1-3

 

1.1.5 vlan-vpn tpid ............................................................................................................ 1-5

 

Chapter 2 Selective QinQ Configuration Commands ................................................................ 2-1

 

2.1 Selective QinQ Configuration Commands ......................................................................... 2-1

 

2.1.1 mac-address-mapping ............................................................................................ 2-1

 

2.1.2 raw-vlan-id inbound ................................................................................................. 2-2

 

2.1.3 vlan-vpn vid ............................................................................................................. 2-3

 

Chapter 3 BPDU Tunnel Configuration Commands .................................................................. 3-1

 

3.1 BPDU Tunnel Configuration Commands ........................................................................... 3-1

 

3.1.1 bpdu-tunnel ............................................................................................................. 3-1

 

3.1.2 bpdu-tunnel tunnel-dmac ........................................................................................ 3-3

 

3.1.3 display bpdu-tunnel ................................................................................................. 3-4

 

 

Summary of Contents for S3100-52P
















Reviews: