![background image](http://html1.mh-extra.com/html/smc-networks/8708l2/8708l2_management-manual_1300245236.webp)
C
ONFIGURING
THE
S
WITCH
3-184
Web
– Click Spanning Tree, MSTP, Port Configuration or Trunk
Configuration. Enter the priority and path cost for an interface, and click
Apply.
Figure 3-72 MSTP Port Configuration
CLI
– This example sets the MSTP attributes for port 4.
VLAN Configuration
IEEE 802.1Q VLANs
In large networks, routers are used to isolate broadcast traffic for each
subnet into separate domains. This switch provides a similar service at
Layer 2 by using VLANs to organize any group of network nodes into
separate broadcast domains. VLANs confine broadcast traffic to the
originating group, and can eliminate broadcast storms in large networks.
This also provides a more secure and cleaner network environment.
An IEEE 802.1Q VLAN is a group of ports that can be located anywhere
in the network, but communicate as though they belong to the same
physical segment.
Console(config)#interface ethernet 1/4
4-170
Console(config-if)#spanning-tree mst 1 port-priority 0
4-219
Console(config-if)#spanning-tree mst 1 cost 50
4-218
Console(config-if)
Summary of Contents for 8708L2
