manualshive.com logo in svg

SMC Networks 8708L2, Management Manual

Share
Download
SMC Networks 8708L2 Management Manual Download Page 577

DNS C

OMMANDS

4-287

ip domain-name

This command defines the default domain name appended to incomplete 
host names (i.e., host names passed from a client that are not formatted 
with dotted notation). Use the 

no

 form to remove the current domain 

name.

Syntax 

ip domain-name 

name

no ip domain-name

-  

name

 - Name of the host. Do not include the initial dot that separates 

the host name from the domain name. (Range: 1-64 characters)

Default Setting 

None

Command Mode 

Global Configuration

Example

Related Commands 

ip domain-list (4-288)
ip name-server (4-289)
ip domain-lookup (4-290)

Console(config)#ip domain-name sample.com
Console(config)#end
Console#show dns
Domain Lookup Status:
    DNS disabled
Default Domain Name:
    sample.com
Domain Name List:
Name Server List:
Console#

Summary of Contents for 8708L2































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands