![background image](http://html1.mh-extra.com/html/smc-networks/8708l2/8708l2_management-manual_1300245447.webp)
SNMP C
OMMANDS
4-157
3. Specify the target host that will receive inform messages with the
snmp-server host
command as described in this section.
4. Create a view with the required notification messages (page 4-161).
5. Create a group that includes the required notify view (page 4-163).
To send an inform to a SNMPv3 host, complete these steps:
1. Enable the SNMP agent (page 4-151).
2. Allow the switch to send SNMP traps; i.e., notifications (page 4-158).
3. Specify the target host that will receive inform messages with the
snmp-server host
command as described in this section.
4. Create a view with the required notification messages (page 4-161).
5. Create a group that includes the required notify view (page 4-163).
6. Specify a remote engine ID where the user resides (page 4-159).
7. Then configure a remote user (page 4-166).
• The switch can send SNMP Version 1, 2c or 3 notifications to a host
IP address, depending on the SNMP version that the management
station supports. If the
snmp-server host
command does not specify
the SNMP version, the default is to send SNMP version 1 notifications.
• If you specify an SNMP Version 3 host, then the community string is
interpreted as an SNMP user name. If you use the V3 “auth” or “priv”
options, the user name must first be defined with the
snmp-server
user
command. Otherwise, the authentication password and/or
privacy password will not exist, and the switch will not authorize
SNMP access for the host. However, if you specify a V3 host with the
“noauth” option, an SNMP user account will be generated, and the
switch will authorize SNMP access for the host.
Example
Related Commands
snmp-server enable traps (4-158)
Console(config)#snmp-server host 10.1.19.23 inform retries 10
timeout 30 batman version 2c udp-port 162
Console(config)#
Summary of Contents for 8708L2
