SMC Networks 8708L2, Management Manual

Page: 395 / 606

A
UTHENTICATION
C
OMMANDS
4-105
port security
This command enables or configures port security. Use the no form
without any keywords to disable port security. Use the no form with the
appropriate keyword to restore the default settings for a response to
security violation or for the maximum number of allowed addresses.
Syntax
port security [ action { shutdown | trap | trap-and-shutdown }
| max-mac-count address-count ]
no port security [ action | max-mac-count ]
• action - Response to take when port security is violated.
- shutdown - Disable port only.
- trap - Issue SNMP trap message only.
- trap-and-shutdown - Issue SNMP trap message and disable
port.
• max - mac - count
- address-count - The maximum number of MAC addresses that can
be learned on a port. (Range: 0 - 1024, where 0 means disabled)
Default Setting
• Status: Disabled
• Action: None
• Maximum Addresses: 0
Command Mode
Interface Configuration (Ethernet Ports 1-8)
Table 4-31 Port Security Commands
Command Function Mode Page
port security Configures a secure port IC 4-105
mac-address-table
static Maps a static address to a port in a
VLAN GC 4-199
show
mac-address-table Displays entries in the bridge-forwarding
database PE 4-201