Command Line Interface
4-46
4
Command Mode
Global Configuration
Command Usage
The command specifies the facility type tag sent in syslog messages. (See
RFC 3164.) This type has no effect on the kind of messages reported by the
switch. However, it may be used by the syslog server to sort messages or to
store messages in the corresponding database.
Example
logging trap
This command enables the logging of system messages to a remote server, or limits
the syslog messages saved to a remote server based on severity. Use this
command without a specified level to enable remote logging. Use the
no
form to
disable remote logging.
Syntax
logging trap
[
level
]
no logging trap
level
- One of the level arguments listed below. Messages sent include the
selected level up through level 0. (Refer to the table on page 4-44.)
Default Setting
• Disabled
• Level 7 - 0
Command Mode
Global Configuration
Command Usage
• Using this command with a specified level enables remote logging and sets
the minimum severity level to be saved.
• Using this command without a specified level also enables remote logging, but
restores the minimum severity level to the default.
Example
clear logging
This command clears messages from the log buffer.
Console(config)#logging facility 19
Console(config)#
Console(config)#logging trap 4
Console(config)#
Summary of Contents for 8124PL2
