![background image](http://html.mh-extra.com/html/smc-networks/8124pl2/8124pl2_management-manual_1300682436.webp)
LLDP
4-203
4
Syntax
lldp reinit-delay
<
seconds
>
no lldp reinit-delay
•
seconds
- Specifies the delay before attempting to re-initialize LLDP. (Range:
5 - 10 seconds)
Default Setting
2 seconds
Command Mode
Global Configuration
Command Usage
• When LLDP is re-initialized on a port, all information in the remote systems
LLDP MIB associated with this port is deleted.
Example
lldp notification-interval
This command configures the allowed interval for sending SNMP notifications about
LLDP MIB changes. Use the
no
form to restore the default setting.
Syntax
lldp notification-interval
<
seconds
>
no lldp notification-interval
•
seconds
- Specifies the periodic interval at which SNMP notifications are sent.
(Range: 5 - 3600 seconds)
Default Setting
5 seconds
Command Mode
Global Configuration
Command Usage
• This parameter only applies to SNMP applications which use data stored in
the LLDP MIB for network monitoring or management.
• Information about changes in LLDP neighbors that occur between SNMP
notifications is not transmitted. Only state changes that exist at the time of a
notification are included in the transmission. An SNMP agent should therefore
periodically check the value of lldpStatsRemTableLastChangeTime to detect
any lldpRemTablesChange notification-events missed due to throttling or
Console(config)#lldp reinit-delay 10
Console(config)#
Summary of Contents for 8124PL2
