![background image](http://html.mh-extra.com/html/smc-networks/8124pl2/8124pl2_management-manual_1300682074.webp)
Basic Configuration
3-29
Remote Log Configuration
The Remote Logs page allows you to configure the logging of messages that are
sent to syslog servers or other management stations. You can also limit the error
messages sent to only those messages below a specified level.
Command Attributes
•
Remote Log Status
– Enables/disables the logging of debug or error messages
to the remote logging process. (Default: Enabled)
•
Logging Facility
– Sets the facility type for remote logging of syslog messages.
There are eight facility types specified by values of 16 to 23. The facility type is
used by the syslog server to dispatch log messages to an appropriate service. The
attribute specifies the facility type tag sent in syslog messages. (See RFC 3164.)
This type has no effect on the kind of messages reported by the switch. However,
it may be used by the syslog server to process messages, such as sorting or
storing messages in the corresponding database. (Range: 16-23, Default: 23)
•
Logging Trap
– Limits log messages that are sent to the remote syslog server for
all levels up to the specified level. For example, if level 3 is specified, all messages
from level 0 to level 3 will be sent to the remote server. (Range: 0-7, Default: 7)
•
Host IP List
– Displays the list of remote server IP addresses that receive the
syslog messages. The maximum number of host IP addresses allowed is five.
•
Host IP Address
– Specifies a new server IP address to add to the Host IP List.
Web
– Click System, Log, Remote Logs. To add an IP address to the Host IP List,
type the new IP address in the Host IP Address box, and then click Add. To delete
an IP address, click the entry in the Host IP List, and then click Remove.
Figure 3-18. Remote Logs
Summary of Contents for 8124PL2
