![background image](http://html.mh-extra.com/html/smc-networks/8124pl2/8124pl2_management-manual_1300682435.webp)
Command Line Interface
4-202
4
Command Usage
• The transmit delay is used to prevent a series of successive LLDP
transmissions during a short period of rapid changes in local LLDP MIB
objects, and to increase the probability that multiple, rather than single
changes, are reported in each transmission.
Example
lldp transmit-hold
This command configures the time-to-live (TTL) value sent in LLDP advertisements.
Use the
no
form to restore the default setting.
Syntax
lldp transmit-hold
<
value
>
no lldp transmit-hold
•
value
- Calculates the TTL in seconds based on transmit-hold *
transmit-interval (Range: 2 - 10)
Default Setting
4 (4*30 = 120 seconds)
Command Mode
Global Configuration
Command Usage
• The transmit hold tells the receiving LLDP agent how long to hold onto all
information pertaining to the sending LLDP agent if it does not transmit
updates in a timely manner.
Example
lldp reinit-delay
This command configures the delay before attempting to re-initialize after LLDP
ports are disabled or the link goes down. Use the
no
form to restore the default
setting.
Console(config)#lldp transmit-delay 10
Console(config)#
Console(config)#lldp transmit-hold 10
Console(config)#
Summary of Contents for 8124PL2
