![background image](http://html.mh-extra.com/html/smc-networks/8124pl2/8124pl2_management-manual_1300682408.webp)
Priority Commands
4-175
4
Command Mode
Privileged Exec
Example
Priority Commands
(Layer 3 and 4)
map ip dscp
(Global Configuration)
This command enables IP DSCP mapping (i.e., Differentiated Services Code Point
mapping). Use the
no
form to disable IP DSCP mapping.
Syntax
[no] map ip dscp
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• The precedence for priority mapping is IP DSCP, and default switchport
priority.
Example
The following example shows how to enable IP DSCP mapping globally.
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
CoS Value : 0 1 2 3 4 5 6 7
Priority Queue: 2 0 1 3 4 5 6 7
Console#
Table 4-63. Priority Commands (Layer 3 and 4)
Command
Function
Mode
Page
map ip dscp
Enables IP DSCP class of service mapping
GC
4-175
map ip dscp
Maps IP DSCP value to a class of service
IC
4-176
map access-list ip
Sets the CoS value and corresponding output queue for
packets matching an ACL rule
IC
4-93
show map ip dscp
Shows the IP DSCP map
PE
4-177
show map access-list ip
Shows CoS value mapped to an access list for an
interface
PE
4-94
Console(config)#map ip dscp
Console(config)#
Summary of Contents for 8124PL2
