![background image](http://html.mh-extra.com/html/smc-networks/8124pl2/8124pl2_management-manual_1300682068.webp)
Basic Configuration
3-23
• Parity – Defines the generation of a parity bit. Communication protocols provided
by some terminals can require a specific parity bit setting. Specify Even, Odd, or
None. (Default: None)
• Speed – Sets the terminal line’s baud rate for transmit (to terminal) and receive
(from terminal). Set the speed to match the baud rate of the device connected to
the serial port. (Range: 9600, 19200, or 38400 baud; Default: 9600 bps)
• Stop Bits – Sets the number of the stop bits transmitted per byte. (Range: 1-2;
Default: 1 stop bit)
Available in CLI only:
• Password – Specifies a password for the line connection. When a connection is
started on a line with password protection, the system prompts for the password. If
you enter the correct password, the system shows a prompt. (Default: No
password)
• Login – Enables password checking at login. You can select authentication by a
single global password as configured for the Password parameter, or by passwords
set up for specific user-name accounts. (Default: Local)
Web
– Click System, Line, Console. Specify the console port connection parameters
as required, then click Apply.
Figure 3-14. Console Port Setting
Summary of Contents for 8124PL2
