SMC Networks 8124PL2, Management Manual

Page: 138 / 491

Port Configuration
3-93
Web – Click Port, LACP, Port Internal Information. Select a port channel to display
the corresponding information.
Figure 3-55. Displaying LACP Port Information
LACP System Priority LACP system priority assigned to this port channel.
LACP Port Priority LACP port priority assigned to this interface within the channel group.
Admin State,
Oper State
Administrative or operational values of the actor’s state parameters:
Expired – The actor’s receive machine is in the expired state;
Defaulted – The actor’s receive machine is using defaulted operational
partner information, administratively configured for the partner.
Distributing – If false, distribution of outgoing frames on this link is
disabled; i.e., distribution is currently disabled and is not expected to be
enabled in the absence of administrative changes or changes in received
protocol information.
Collecting – Collection of incoming frames on this link is enabled; i.e.,
collection is currently enabled and is not expected to be disabled in the
absence of administrative changes or changes in received protocol
information.
Synchronization – The System considers this link to be IN_SYNC; i.e., it
has been allocated to the correct Link Aggregation Group, the group has
been associated with a compatible Aggregator, and the identity of the Link
Aggregation Group is consistent with the System ID and operational Key
information transmitted.
Aggregation – The system considers this link to be aggregatable; i.e., a
potential candidate for aggregation.
Long timeout – Periodic transmission of LACPDUs uses a slow
transmission rate.
LACP-Activity – Activity control value with regard to this link.
(0: Passive; 1: Active)
Table 3-9 LACP Settings
Field Description