![background image](http://html.mh-extra.com/html/smc-networks/8124pl2/8124pl2_management-manual_1300682415.webp)
Command Line Interface
4-182
4
Example
The following shows the multicast entries learned through IGMP snooping for
VLAN 1:
IGMP Query Commands
(Layer 2)
ip igmp snooping querier
This command enables the switch as an IGMP querier. Use the
no
form to disable it.
Syntax
[
no
]
ip igmp snooping querier
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
If enabled, the switch will serve as querier if elected. The querier is
responsible for asking hosts if they want to receive multicast traffic.
Example
ip igmp snooping query-count
This command configures the query count. Use the
no
form to restore the default.
Console#show mac-address-table multicast vlan 1 igmp-snooping
VLAN M'cast IP addr. Member ports Type
---- --------------- ------------ -------
1 224.1.2.3 Eth1/11 IGMP
Console#
Table 4-67. IGMP Query Commands (Layer 2)
Command
Function
Mode
Page
ip igmp snooping querier
Allows this device to act as the querier for IGMP
snooping
GC
4-182
ip igmp snooping query-count
Configures the query count
GC
4-182
ip igmp snooping query-interval
Configures the query interval
GC
4-183
ip igmp snooping
query-max-response-time
Configures the report delay
GC
4-184
ip igmp snooping
router-port-expire-time
Configures the query timeout
GC
4-185
Console(config)#ip igmp snooping querier
Console(config)#
Summary of Contents for 8124PL2
