![background image](http://html.mh-extra.com/html/smc-networks/8124pl2/8124pl2_management-manual_1300682305.webp)
Command Line Interface
4-72
4
Command Usage
• RADIUS uses UDP while uses TCP. UDP only offers best effort
delivery, while TCP offers a connection-oriented transport. Also, note that
RADIUS encrypts only the password in the access-request packet from the
client to the server, while encrypts the entire body of the packet.
• RADIUS and logon authentication assigns a specific privilege level
for each user name and password pair. The user name, password, and
privilege level must be configured on the authentication server.
• You can specify three authentication methods in a single command to indicate
the authentication sequence. For example, if you enter “
authentication
enable radius tacacs local
,” the user name and password on the RADIUS
server is verified first. If the RADIUS server is not available, then
authentication is attempted on the server. If the server
is not available, the local user name and password is checked.
Example
Related Commands
enable password - sets password for changing command modes (4-26)
RADIUS Client
Remote Authentication Dial-in User Service (RADIUS) is a logon authentication
protocol that uses software running on a central server to control access to
RADIUS-aware devices on the network. An authentication server contains a
database of multiple user name/password pairs with associated privilege levels for
each user or group that require management access to a switch.
radius-server host
This command specifies primary and backup RADIUS servers and authentication
parameters that apply to each server. Use the
no
form to restore the default values.
Console(config)#authentication enable radius
Console(config)#
Table 4-29. RADIUS Client Commands
Command
Function
Mode
Page
radius-server host
Specifies the RADIUS server
GC
4-72
radius-server port
Sets the RADIUS server network port
GC
4-73
radius-server key
Sets the RADIUS encryption key
GC
4-74
radius-server retransmit
Sets the number of retries
GC
4-74
radius-server timeout
Sets the interval between sending authentication
requests
GC
4-75
show radius-server
Shows the current RADIUS settings
PE
4-75
Summary of Contents for 8124PL2
