SMC Networks 8124PL2, Management Manual

Page: 313 / 491

Command Line Interface
4-80
4
802.1X Port Authentication
The switch supports IEEE 802.1X (dot1x) port-based access control that prevents
unauthorized access to the network by requiring users to first submit credentials for
authentication. Client authentication is controlled centrally by a RADIUS server
using EAP (Extensible Authentication Protocol).
dot1x system-auth-control
This command enables IEEE 802.1X port authentication globally on the switch.
Use the
no form to restore the default.
Syntax
[no] dot1x system-auth-control
Default Setting
Disabled
Command Mode
Global Configuration
Table 4-32. 802.1X Port Authentication Commands
Command Function Mode Page
dot1x system-auth-control Enables dot1x globally on the switch. GC 4-80
dot1x default Resets all dot1x parameters to their default values GC 4-81
dot1x max-req Sets the maximum number of times that the switch
retransmits an EAP request/identity packet to the
client before it times out the authentication session
IC 4-81
dot1x port-control Sets dot1x mode for a port interface IC 4-81
dot1x operation-mode Allows single or multiple hosts on a dot1x port IC 4-82
dot1x re-authenticate Forces re-authentication on specific ports PE 4-83
dot1x re-authentication Enables re-authentication for all ports IC 4-83
dot1x timeout quiet-period Sets the time that a switch port waits after the Max
Request Count has been exceeded before
attempting to acquire a new client
IC 4-83
dot1x timeout re-authperiod Sets the time period after which a connected client
must be re-authenticated
IC 4-84
dot1x timeout tx-period Sets the time period during an authentication
session that the switch waits before re-transmitting
an EAP packet
IC 4-84
show dot1x Shows all dot1x related information PE 4-85