![background image](http://html.mh-extra.com/html/smc-networks/8124pl2/8124pl2_management-manual_1300682220.webp)
DHCP Snooping
3-175
CLI
– This example statically assigns a multicast group to a receiver port.
DHCP Snooping
DHCP snooping allows a switch to protect a network from rogue DHCP servers or
other devices which send port-related information to a DHCP server. This
information can be useful in tracking an IP address back to a physical port.
Network traffic may be disrupted when malicious DHCP messages are received
from an outside source. DHCP snooping is used to filter DHCP messages received
on a non-secure interface from outside the network or firewall. When DHCP
snooping is enabled globally and enabled on a VLAN interface, DHCP messages
received on an untrusted interface from a device not listed in the DHCP snooping
table will be dropped.
When enabled, DHCP messages entering an untrusted interface are filtered based
upon dynamic entries learned via DHCP snooping.
Filtering rules are implemented as follows:
• If the global DHCP snooping is disabled, all DHCP packets are forwarded.
• If DHCP snooping is enabled globally, and also enabled on the VLAN where the
DHCP packet is received, all DHCP packets are forwarded for a
trusted
port. If the
received packet is a DHCP ACK message, a dynamic DHCP snooping entry is also
added to the binding table.
• If DHCP snooping is enabled globally, and also enabled on the VLAN where the
DHCP packet is received, but the port is
not trusted
, it is processed as follows:
• If the DHCP packet is a reply packet from a DHCP server (including OFFER,
ACK or NAK messages), the packet is dropped.
• If the DHCP packet is from a client, such as a DECLINE or RELEASE message,
the switch forwards the packet only if the corresponding entry is found in the
binding table.
• If the DHCP packet is from a client, such as a DISCOVER, REQUEST, INFORM,
DECLINE or RELEASE message, the packet is forwarded if MAC address
verification is disabled. However, if MAC address verification is enabled, then
the packet will only be forwarded if the client’s hardware address stored in the
DHCP packet is the same as the source MAC address in the Ethernet header.
• If the DHCP packet is not a recognizable type, it is dropped.
• If a DHCP packet from a client passes the filtering criteria above, it will only be
forwarded to trusted ports in the same VLAN.
• If a DHCP packet is from server is received on a trusted port, it will be forwarded
to both trusted and untrusted ports in the same VLAN.
Console(config)#interface ethernet 1/2
Console(config-if)#mvr group 228.1.23.1
4-195
Console(config-if)#
Summary of Contents for 8124PL2
