![background image](http://html.mh-extra.com/html/smc-networks/8124pl2/8124pl2_management-manual_1300682127.webp)
Configuring the Switch
3-82
Field Attributes (CLI)
Basic information:
•
Port type
– Indicates the port type.
• (1000BASE-T, 1000BASE-SX, 1000BASE-LX or 100BASE-FX)
•
MAC address
– The physical layer address for this port. (To access this item on
the web, see “Setting the Switch’s IP Address” on page 3-14.)
Configuration:
•
Name
– Interface label.
•
Port admin
– Shows if the interface is enabled or disabled (i.e., up or down).
•
Speed-duplex
– Shows the current speed and duplex mode. (Auto, or fixed
choice)
•
Capabilities
– Specifies the capabilities to be advertised for a port during
auto-negotiation. (To access this item on the web, see “Configuring Interface
Connections” on page 3-48.) The following capabilities are supported.
•
10half
- Supports 10 Mbps half-duplex operation
•
10full
- Supports 10 Mbps full-duplex operation
•
100half
- Supports 100 Mbps half-duplex operation
•
100full
- Supports 100 Mbps full-duplex operation
•
1000full
- Supports 1000 Mbps full-duplex operation
•
Sym
- Transmits and receives pause frames for flow control
•
FC
- Supports flow control
•
Broadcast storm
– Shows if broadcast storm control is enabled or disabled.
• Broadcast storm limit
– Shows the broadcast storm threshold.
(240 - 1488100 packets per second)
•
Flow control
– Shows if flow control is enabled or disabled.
•
LACP
– Shows if LACP is enabled or disabled.
•
Port Security
– Shows if port security is enabled or disabled.
•
Max MAC count
– Shows the maximum number of MAC address that can be
learned by a port. (0 - 1024 addresses)
•
Port security action
– Shows the response to take when a security violation is
detected. (shutdown, trap, trap-and-shutdown)
Current status:
•
Link Status
– Indicates if the link is up or down.
• Port Operation Status – Provides detailed information on port state. (Displayed
only when the link is up.)
•
Operation speed-duplex
– Shows the current speed and duplex mode.
•
Flow control type
– Indicates the type of flow control currently in use.
(IEEE 802.3x, Back-Pressure or none)
Summary of Contents for 8124PL2
