![background image](http://html.mh-extra.com/html/smc-networks/8124pl2/8124pl2_management-manual_1300682325.webp)
Command Line Interface
4-92
4
Example
This example accepts any incoming packets if the source address is within subnet
10.7.1.x. For example, if the rule is matched; i.e., the rule (10.7.1.0 & 255.255.255.0)
equals the masked address (10.7.1.2 & 255.255.255.0), the packet passes through.
This allows TCP packets from class C addresses 192.168.1.0 to any destination
address when set for destination TCP port 80 (i.e., HTTP).
Related Commands
access-list ip (4-89)
show ip access-list
This command displays the rules for configured IP ACLs.
Syntax
show ip access-list
{
standard
|
extended
} [
acl_name
]
-
standard
– Specifies a standard IP ACL.
-
extended
– Specifies an extended IP ACL.
-
acl_name
– Name of the ACL. (Maximum length: 16 characters)
Command Mode
Privileged Exec
Example
Related Commands
permit, deny 4-90
ip access-group (4-92)
ip access-group
This command binds a port to an IP ACL. Use the
no
form to remove the port.
Syntax
[
no
]
ip access-group acl_name
{
in
|
out
}
-
acl_name
– Name of the ACL. (Maximum length: 16 characters)
Console(config-ext-acl)#permit 10.7.1.1 255.255.255.0 any
Console(config-ext-acl)#
Console(config-ext-acl)#permit 192.168.1.0 255.255.255.0 any
destination-port 80
Console(config-ext-acl)#
Console#show ip access-list standard
IP standard access-list david:
permit host 10.1.1.21
permit 168.92.0.0 0.0.15.255
Console#
Summary of Contents for 8124PL2
