SMC Networks 8124PL2, Management Manual

Page: 282 / 491

System Management Commands
4-49
4
Syntax
show log { flash | ram }
- flash - Event history stored in flash memory (i.e., permanent memory).
- ram - Event history stored in temporary RAM (i.e., memory flushed on
power reset).
Default Setting
None
Command Mode
Privileged Exec
Example
The following example shows the event message stored in RAM.
SMTP Alert Commands
These commands configure SMTP event handling, and forwarding of alert
messages to the specified SMTP servers and email recipients.
logging sendmail host
This command specifies SMTP servers that will be sent alert messages. Use the no
form to remove an SMTP server.
Syntax
[ no ] logging sendmail host ip_address
Console#show log ram
[1] 00:01:30 2001-01-01
"VLAN 1 link-up notification."
level: 6, module: 5, function: 1, and event no.: 1
[0] 00:01:30 2001-01-01
"Unit 1, Port 1 link-up notification."
level: 6, module: 5, function: 1, and event no.: 1
Console#
Table 4-21. SMTP Alert Commands
Command Function Mode Page
logging sendmail host Specifies SMTP servers that will be sent alert messages GC 4-49
logging sendmail level
Sets the
severity threshold used to trigger alert
messages
GC 4-50
logging sendmail
source-email
Sets the
email address used for “From” field of alert
messages
GC 4-51
logging sendmail
destination-email
Specifies the email recipients of alert messages GC 4-51
logging sendmail Enables SMTP event handling GC 4-52
show logging sendmail Displays SMTP event handler settings NE, PE 4-52