SMC Networks 8124PL2, Management Manual

Page: 329 / 491

Command Line Interface
4-96
4
Example
SNMP Commands
Controls access to this switch from management stations using the Simple Network
Management Protocol (SNMP), as well as the error types sent to trap managers.
SNMP Version 3 provides security features that cover message integrity,
authentication, and encryption; as well as controlling user access to specific areas of
the MIB tree. To use SNMPv3, first set an SNMP engine ID (or accept the default),
specify read and write access views for the MIB tree, configure SNMP user groups
with the required security model (i.e., SNMP v1, v2c or v3) and security level (i.e.,
authentication and privacy), and then assign SNMP users to these groups, along
with their specific authentication and privacy passwords.
snmp-server
This command enables the SNMPv3 engine and services for all management clients
(i.e., versions 1, 2c, 3). Use the
no form to disable the server.
Console#show access-group
Interface ethernet 1/25
IP standard access-list david
IP access-list jerry
Console#
Table 4-37. SNMP Commands
Command Function Mode Page
snmp-server Enables the SNMPv3 server GC 4-96
show snmp Displays the status of SNMP communications NE, PE 4-97
snmp-server community Sets up the community access string to permit access to
SNMP commands
GC 4-98
snmp-server contact Sets the system contact string GC 4-99
snmp-server location Sets the system location string GC 4-99
snmp-server host Specifies the recipient of an SNMP notification operation GC 4-100
snmp-server enable traps Enables the device to send SNMP traps (i.e., SNMP
notifications)
GC 4-102
snmp-server engine-id Sets the SNMPv3 engine ID GC 4-103
show snmp engine-id Shows the SNMPv3 engine ID PE 4-104
snmp-server view Adds an SNMPv3 view GC 4-105
show snmp view Shows the SNMPv3 views PE 4-105
snmp-server group Adds an SNMPv3 group, mapping users to views GC 4-106
show snmp group Shows the SNMPv3 groups PE 4-107
snmp-server user Adds a user to an SNMPv3 group GC 4-109
show snmp user Shows the SNMPv3 users PE 4-110