![background image](http://html.mh-extra.com/html/smc-networks/2888w-m/2888w-m_owners-manual_1300139204.webp)
Command Line Interface
7-34
SNMP Commands
Controls access to this wireless bridge from management
stations using the Simple Network Management Protocol
(SNMP), as well as the hosts that will receive trap messages.
snmp-server community
This command defines the community access string for the
Simple Network Management Protocol. Use the
no
form to
remove the specified community string.
Syntax
snmp-server community
string
[
ro
|
rw
]
no snmp-server community
string
•
string
- Community string that acts like a password and
permits access to the SNMP protocol. (Maximum length: 23
characters, case sensitive)
•
ro
- Specifies read-only access. Authorized management
stations are only able to retrieve MIB objects.
•
rw
- Specifies read/write access. Authorized management
stations are able to both retrieve and modify MIB objects.
Command
Function
Mode Page
snmp-server
community
Sets up the community access string
to permit access to SNMP commands
GC
7-34
snmp-server
contact
Sets the system contact string
GC
7-35
snmp-server
enable server
Enables SNMP service and traps
GC
7-36
snmp-server host Specifies the recipient of an SNMP
notification operation
GC
7-37
snmp-server
location
Sets the system location string
GC
7-38
show snmp
Displays the status of SNMP
communications
Exec 7-39
Summary of Contents for 2888W-M
