![background image](http://html.mh-extra.com/html/smc-networks/2888w-m/2888w-m_owners-manual_1300139182.webp)
Command Line Interface
7-12
Example
This example shows how to return to the Exec mode from the
Interface Configuration mode, and then quit the CLI session:
ping
This command sends ICMP echo request packets to another
node on the network.
Syntax
ping
<
host_name | ip_address
>
•
host_name
- Alias of the host.
•
ip_address
- IP address of the host.
Default Setting
None
Command Mode
Exec
Command Usage
• Use the ping command to see if another site on the network
can be reached.
• The following are some results of the
ping
command:
–
Normal response
- The normal response occurs in one to
ten seconds, depending on network traffic.
–
Destination does not respond
- If the host does not
respond, a “timeout” appears in ten seconds.
–
Destination unreachable
- The gateway for this destination
indicates that the destination is unreachable.
AP(if-ethernet)#exit
AP#exit
CLI session with the wireless bridge is now closed
Username:
Summary of Contents for 2888W-M
