Command Line Interface
7-28
Example
System Clock Commands
These commands are used to configure SNTP and system clock
settings on the wireless bridge.
AP#show logging
Logging Information
============================================
Syslog State : Disabled
Logging Host State : Enabled
Logging Console State : Disabled
Server Domain name/IP : none
Logging Level : Error
Logging Facility Type : 16
=============================================
AP#
Command
Function
Mode
Page
sntp-server ip
Specifies one or more time servers
GC
7-29
sntp-server
enable
Accepts time from the specified time
servers
GC
7-30
sntp-server
date-time
Manually sets the system date and
time
GC
7-31
sntp-server
daylight-saving
Sets the start and end dates for
daylight savings time
GC
7-31
sntp-server
timezone
Sets the time zone for the wireless
bridge’s internal clock
GC
7-32
show sntp
Shows current SNTP configuration
settings
Exec 7-33
Summary of Contents for 2888W-M
