![background image](http://html.mh-extra.com/html/smc-networks/2888w-m/2888w-m_owners-manual_1300139085.webp)
Advanced Configuration
6-9
•
Default Gateway: The default gateway is the IP address of the
router for the wireless bridge, which is used if the requested
destination address is not on the local subnet.
•
If you have management stations, DNS, or other network
servers located on another subnet, type the IP address of the
default gateway router in the text field provided. Otherwise,
leave the address as all zeros (0.0.0.0).
•
Primary and Secondary DNS Address: The IP address of
Domain Name Servers on the network. A DNS maps
numerical IP addresses to domain names and can be used to
identify network hosts by familiar names instead of the IP
addresses.
•
If you have one or more DNS servers located on the local
network, type the IP addresses in the text fields provided.
Otherwise, leave the addresses as all zeros (0.0.0.0).
CLI Commands for TCP/IP Settings – From the global
configuration mode, enter the interface configuration mode with
the interface ethernet command. Use the
ip dhcp
command to
enable the DHCP client, or
no ip dhcp
to disable it. To manually
configure an address, specify the new IP address, subnet mask,
and default gateway using the
ip address
command. To specify
DNS server addresses use the
dns server
command. Then use
the
show interface ethernet
command from the Exec mode to
display the current IP settings.
Summary of Contents for 2888W-M
